This Maximus air dryer is the perfect addition to your 10 to 15 horsepower compressor setup.  With an airflow volume of 53 CFM, it is sure to keep your compressed air system running smoothly. The refrigerator type ensures that your air stays dry and free of moisture, making it ideal for use in various industrial settings.

This product falls under the categories of compressed air dryers, compressed air treatment, hydraulics, Pneumatics, pumps & plumbing, and business & industrial. Invest in this high-quality dryer today and enjoy the benefits of dry and clean compressed air.

Below are the specifications: 

• Flow capacity: 53 cfm 
• Working pressure: 58 psi to 232 psi 
• Inlet and outlet ports size 1” NPT 
• Refrigerant Type R134A 
• Voltage 110V, 60 Hz AC 
• Weight: 71 lbs 
• Dimensions 24” x 15” x 25” 
• Model NX-1.5HF

The Twin-AirTM compressor system has been designed to provide Grade-D breathing air to 3 workers wearing pressure-demand respirators. The TA-3 has twin ASME receiver tanks that act as the mounting frame for the compressor. The use of the receiver tanks provides air that has been cooled to within 10 degrees of the ambient temperature. There are added pneumatic tires for ease of mobility in rough terrain and a bottom skid plate for going up or down stairs. This plate becomes the frame for the addition of a reserve air cylinder on the model TA-3.

• This breathing air compressor system is in good working condition.
• The compressor runs well and reaches a pressure of 115 psi on the tank and 95 psi at the breather box.
• The breather box is a model BB30-C03 and is equipped with air filtration, a regulator, and a carbon monoxide monitor.
• Both the compressor and the box operate at 120 VAC.
• The system comes with a yellow hose to connect the compressor to the box and 3 black air hoses to connect to the respirators.
• The respirators are not included. 

Although specifically made as a breathing air compressor, it can be used as a regular air compressor. It is equipped with a rotary vane pump and an 8-gallon tank. It is portable and easy to move.

• This pump is in good working condition. 
• It came off of an Ingersoll Rand model SSR-EP10, serial no. A02292U95317. 
• The compressor was building air, and the pump was working fine prior to removal. 
• The compressor was parted out due to electrical issues. 
• It has a couple of part numbers stamped on the body of the airend. 
• They are 39826318 and 39826334.

• This high-quality rotary screw air compressor is a powerful and reliable machine that is capable of delivering consistent and efficient performance for a wide range of industrial applications. 
• It is rated at 10 HP (7.5 kW) and a three-phase power. 
• This compressor is able to produce an impressive 38.8 CFM of compressed air at a rated voltage of 230 V. 
• Designed for use in businesses and industrial settings,
• This air compressor is perfect for powering pneumatic tools, pumps, and other equipment. 
• With its durable construction and reliable performance, 
• The Maximus 10 HP Rotary Screw Air Compressor is a great investment for any business or workshop.
• The compressor includes a 1-year warranty and comes with the instruction manual. Maximus Model JJ-10A

• Up for sale we have an Atlas Copco Air Filter Cleaner Assembly in good working condition. 
• Atlas Copco part number 1625 4302 93. 
• It has a filter inside, but it is used.
• It came off an Atlas Copco 50hp air compressor type GA37, serial no. API579755. 
• It has a 4” port. 
• It could work with other applications, such as engine intake or other compressors. 
• It is very similar to Donaldson air cleaners. 
• Part No. 1625430293.

• Up for sale We have a CKD 3РВ119-L Air Solenoid Valve 24 VDC 8 Bank Manifold in good working condition. 
• This air valve assembly has been tested.
• Each valve is closed until you apply 24VDC, and then it opens to let air through. 
• There are eight solenoid valves in this assembly. 
• CKD 3PB119-L.

• Up for sale we have an Atlas Copco Smartbox GSM CAM Ethernet Modem in working condition. 
• This smartbox seems to be in working condition. 
• The light came on when it was on the compressor. 
• No further testing has been done. 
• It comes with a Globtek adapter.
• It came off an Atlas Copco 50hp air compressor type GA37, serial no. API579755.

• This Sullair Airend Pump, part number 02250160-442, is in good working condition. 
• It was tested when it was installed on the compressor and produced air. 
• It is a model 10 Air End. 
• It was removed off a 30HP Rotary Screw Compressor model 2207V/A, serial no. 201012030037. 
• The compressor had 42,737 hours on the meter prior to removal. 
• The shipping weight is 988 lbs, and the dimensions are 63" L x 34" W x 48" H.
• Unit will be strapped to a pallet and shipped from a commercial location in Hayward, CA 94545.

• This high-quality aftercooler is designed for use with a 20 HP rotary screw air compressor. 
• It is manufactured by Sullair, a trusted brand in the industry. 
• It is made with top-of-the-line materials to ensure durability and longevity. 
• Whether you're looking to replace an old aftercooler or upgrade your compressor system, 
• This Sullair 250040-092 after cooler is an excellent choice.
• The cooler has been tested under pressure and does not have leaks. 
• It is rated at 200 psi and has a max temperature rating of 250 °F. 
• It was removed from a Sullair model 8S-8 20H 208V rotary screw air compressor.

• This Quincy 128900-300 Inlet Valve 128805 is in good working condition. 
• It has a new diaphragm installed. 
• It came off a Quincy 25hp QMTFACA32A rotary screw air compressor. 
• It has been tested prior to removal and works fine.

• This Quincy 128819-1 Heat Exchanger Oil Cooler is in good working condition. 
• It was tested prior to removal and has no leaks. 
• It came off a Quincy 25hp QMTFACA32A rotary screw air compressor.

KRSB Belt-Drive Series Rotary Screw System

• Advanced belt-drive systems reduce energy loss and increase bearing life.
• Power air tools for manufacturing, automotive repair centers, or industrial applications

High-Efficiency TEFC (IP54) Electric Motor 

• Long operating life and lower power use
• IEC frame, class F insulation, and IE3 premium efficiency

MAM-200 Digital Control Panel

• Monitors, controls key functions, and alerts issues with built-in alarms.
• External monitoring via the RS 485 interface and programmed maintenance schedules

Premium SKK Series Air End & Discharge Bearings

• Delivers maximum output with less energy usage.
• Asymmetric 5/6 rotor profile and precision ground rotor machining
• SFK bearings absorb radial and axial loads for longer life and quieter operation.

Heavy-Duty Low Sound Enclosure

• Ensures quiet operation and easy access for serviceability.
• 316 stainless steel control tubing for lower service costs and less downtime

Reliable System Operation

• Automatic belt tensioner for longer belt life
• Integrated aftercoolers and cooling fans for high ambient temperatures
• Laminar flow inlet valve increases output and minimizes pressure drop.

• Large Cyclonic Air Intake Filtration & Spin-On Air Filter/Oil Separator
• High-level contamination removal captures dust without impeding airflow.
• Easy maintenance with spin-on air filter/oil separator; 3 PPM carryover (5-30 HP Only)

Limited Manufacturer Warranty (Below 150 PSI)

Air End, Main Motor, Major Components: 5 Years 

Entire Package: 1 Year

The weight is 507 lbs, and the dimensions are 33" L x 21" W x 37" H.

Unit will be strapped to a pallet and shipped from a commercial location in Fresno, CA 93706.

Up for sale is a Kaeser Oesse 5.7615E2 Aluminum Oil Cooler in good condition. This unit came off a 2013 Kaeser SX5 Air Compressor. 

Specifications below:

• Temp range: -20/+120 
• Max pressure: 16,0 bar 
• Test pressure: 24,0 bar 
• S/N: 23/50 

WT 9 lbs. DIMS 17x13x4

• This high-quality Ultra Filter Ultrasep Superplus 5 Oil Separator is an essential component for your rotary screw air compressor. 
• Its efficient design allows for optimal performance and increased longevity of your compressor system. 
• With its reliable functionality, you can trust that this oil separator will help keep your operations running smoothly. 
• It is compatible with rotary screw compressors and is perfect for use in a variety of industries; from manufacturing to automotive. 
• Invest in this top-of-the-line oil separator today and experience the benefits of improved air quality and reduced maintenance costs.

KRSB Belt-Drive Series Rotary Screw System

• Advanced belt-drive system reduces energy loss and increases bearing life.
• Power air tools for manufacturing, automotive repair centers, or industrial applications

High-Efficiency TEFC (IP54) Electric Motor 

• Long operating life and lower power use
• IEC frame, class F insulation, and IE3 premium efficiency

MAM-200 Digital Control Panel

• Monitors, controls key functions, and alerts issues with built-in alarms.
• External monitoring via the RS 485 interface and programmed maintenance schedules

Premium SKK Series Air End & Discharge Bearings

• Delivers maximum output with less energy usage.
• Asymmetric 5/6 rotor profile and precision ground rotor machining
• SFK bearing absorbs radial and axial loads for longer life and quieter operation.

Heavy-Duty Low Sound Enclosure

• Ensures quiet operation and easy access for serviceability
• 316 stainless steel control tubing for lower service costs and less downtime

Reliable System Operation

• Automatic belt tensioner for longer belt life
• Integrated aftercoolers and cooling fans for high ambient temperatures
• Laminar flow inlet valve increases output and minimizes pressure drop.
• Large Cyclonic Air Intake Filtration & Spin-On Air Filter/Oil Separator
• High-level contamination removal captures dust without impeding airflow.
• Easy maintenance with spin-on air filter/oil separator; 3 PPM carryover (5-30 HP Only)

Limited Manufacturer Warranty (Below 150 PSI)

• Air End, Main Motor, Major Components: 5 Years 
• Entire Package: 1 Year
• The weight is 994 lbs, and the dimensions are 68" L x 28" W x 71" H.

Unit will be strapped to a pallet and shipped from a commercial location in Fresno, CA 93706.